Document Version: V1.1
63
7.3 Inquire information by sending USSD commands
With USSD function, you can inquire specific information or perform specific operations by send a
special code or command to your ISP.
Such codes or commands are predetermined. You can contact your ISP to find those codes or
commands.
Procedure:
Step 1 Log in to the web UI of the router.
Step 2 Navigate to SMS > USSD.
Step 3 Set the USSD CMD, which is *108# in this example.
Step 4 Click Send.
---End
Wait a moment, you will get the desired information you want in the USSD Read box.
To Next Page
Loading...
