2 Quick setup
This chapter describes how to connect the devices and enable internet access through the quick
setup wizard. You can complete quick setup for internet access by following the instructions on the
web UI wizard. This wizard only occurs upon your first setup.
Procedure:
Step 1 Connect your smartphone to the Wi-Fi network, or connect your computer to a LAN port
of the router.
By default, the WAN/LAN and LAN ports are both LAN ports. When the Failover function is enabled, the
WAN/LAN port only serves as a WAN port.
Step 2 Start a web browser on the device connected to the router, and visit tendawifi.com
(computer used as an example).
Step 3 Click Start.
To Next Page
Loading...
