Tenda 4G03 Pro - Change the Wi-Fi Name and Wi-Fi Password

Document Version: V1.1
46
Parameter
Description
Encryption Mode
Specifies the encryption modes supported by the router, including:
−
None: The Wi-Fi network is not encrypted and any clients can access the
network without a password. This option is not recommended as it leads
to low network security.
−
WPA-PSK: The network is encrypted with WPA-PSK/AES, which has a
better compatibility than WPA2-PSK.
−
WPA2-PSK: The network is encrypted with WPA2-PSK/AES, which has a
higher security level than WPA-PSK.
−
WPA/WPA2-PSK (recommended): WPA-PSK and WPA2-PSK are adopted to
encrypt the network, providing both security and compatibility.
Wi-Fi Password
Specifies the password for connecting to the Wi-Fi network. You are strongly
recommended to set a Wi-Fi password for security.
It is recommended to use the combination of digits, uppercase letters, lowercase
letters, and special symbols in the password to enhance the security of the Wi-Fi
network.
6.1.2 Change the Wi-Fi name and Wi-Fi password
Assume that you want to change the 2.4 GHz Wi-Fi name and password to John_Doe_2.4GHz and
Tenda+Wireless24. And WPA/WPA2-PSK (recommended) is set to the encryption mode.
Procedure:
Step 1 Log in to the web UI of the router.
Step 2 Navigate to Wi-Fi Settings > Wi-Fi Name & Password.
Step 3 Change the parameters of the 2.4 GHz network.
1. Change the Wi-Fi Name of the 2.4 GHz network, which is John_Doe_2.4GHz in this
example.
2. Set the Encryption Mode, which is WPA/WPA2-PSK (recommended) in this example.
3. Set the Wi-Fi Password of the 2.4 GHz network, which is Tenda+Wireless24 in this
example.
Step 4 Click Save.