Tenda 4G03 Pro - Access VPN Resources with the Router

Document Version: V1.1
72
8.3.2 Access VPN resources with the router
Scenario: You have subscribed to the PPTP VPN service when purchasing the broadband service
from your ISP.
Goal: Access the VPN resources of your ISP.
Solution: You can configure the PPTP/L2TP client function to reach the goal. Assume that:
−
The IP address of the PPTP server is 113.88.112.220.
−
The user name and password assigned by the PPTP server are both admin1.
Procedure:
Step 1 Log in to the web UI of the router.
Step 2 Navigate to VPN > PPTP/L2TP Client.
Step 3 Enable the PPTP/L2TP Client
Step 4 Choose PPTP as the Client Type.
Step 5 Set the Server IP Address/Domain Name, which is 113.88.112.220 in this example.
Step 6 Set the User Name and Password, which are both admin1 in this example.
Step 7 Click Save.
---End
When Connected is shown in Status, you can access the VPN resources of your ISP.