Tenda 4G03 Pro - An Example of Mobile Data Configurations

Document Version: V1.1
84
Parameter
Description
Data Limit
Used to enable or disable the data limit function. When the limit is reached, the
router will disconnect from the internet automatically.
Monthly Allowance
Specifies the specific maximum data usage allowed for each month.
Usage Alert
When the percentage of data traffic used reaches the limit, the router will send an
alert SMS message to a specified smartphone number.
SMS Alert of Usage
Specifies the smartphone number for receiving the alert SMS message.
You can click Send Test Message to test the smartphone number you entered.
Monthly Data
Statistics
Used to enable or disable the Monthly Data Statistics. When it is enabled, the router
will clear the data of Total Used at the date specified in Start Date.
Start Date
Specifies the date at which the router clears the data statistics of the last month and
start to record in the following month.
9.3.2 An example of mobile data configurations
Scenario: You inserted a SIM card in the router to provide mobile internet access for your
smartphone, iPad and laptop.
Goal: You want to receive SMS message alert on your smartphone and get prepared when the
usage reaches a certain amount every month.
Solution: You can configure mobile data settings to reach the goal.
Assume that:
−
Available data traffic: 10 GB
−
Start date of data usage record: 1st each month
−
Smartphone number: 188****5555
−
Alert percentage: 80%
Procedure:
Step 1 Log in to the web UI of the router.
Step 2 Navigate to Advanced Settings > Mobile Data.
Step 3 (Optional) Click Update to update the current usage data in Total Used.
Step 4 Enable Data Limit.
Step 5 Set Monthly Allowance to 10, and choose GB in the drop-down box.
Step 6 Set Usage Alert to 80%.