Document Version: V1.1
66
Please ensure the WAN IP address of router is a public network. This function may not work on a host
with an IP address of a private network. Common IPv4 addresses are classified into class A, class B and
class C. Private IP addresses of class A range from 10.0.0.0 to 10.255.255.255. Private IP addresses of
class B range from 172.16.0.0 to 172.31.255.255. Private IP addresses of class C range from 192.168.0.0
to 192.168.255.255.
Procedure:
Step 1 Log in to the web UI of the router.
Step 2 Enable the PPTP server function.
1. Navigate to VPN > PPTP Server.
2. Enable the PPTP Server.
3. Enable the MPPE Encryption, which means that the encryption digit remains the default
value “128”.
4. Click Save.
Step 3 Add PPTP user name and password.
1. Set the User Name and Password of the PPTP server, which are admin1 in this example.
2. Click +Add.
---End
After the configuration is completed, internet users can access the FTP server by following these
steps:
Step 1
Click the icon at the bottom right corner on the desktop, and then click Network
settings.
To Next Page
Loading...
