Tenda 4G03 Pro - Page 40

Document Version: V1.1
32
Parameter description
Parameter
Description
Internet
Settings
Mobile Data
Used to enable or disable the mobile data traffic. When it is disabled, you
cannot access the internet through the router.
Data Roaming
Used to enable or disable data roaming for the SIM card inserted in the
router.
Data roaming means the data usage produced when you are outside the
coverage of your ISP. You can disable data roaming to avoid roaming data
usage and charges.
Mobile Data Options
Specifies the mobile network type for internet access.
−
4G Preferred: Priority to sign up for the 4G Wi-Fi network to
access the internet.
−
4G Only: Only access the internet by signing up for the 4G Wi-Fi
network.
−
3G Only: Only access the internet by signing up for the 3G Wi-Fi
network.
Band
Specifies whether to enable the Lock Band function to improve the internet
experience. With the function enabled, it will scan and match the band
supported by the SIM card and ISP according to the surrounding network
environment.
Band List
Used to select single or multiple bands according to your needs. Selecting a
single band can only register the specified band to improve the internet
experience. Selecting multiple bands will use a band from the selected
options according to the actual network conditions (signal strength, signal
quality and so on).
Dial-up
Settings
Profile Name
Generally, all these parameters are predefined in the SIM card. The router
will identify these parameters automatically, which cannot be changed,
and use them for dial-up.
If the router fails to identify these parameters of your SIM card, you must
enter them manually by clicking Create a Profile and dial up for internet
access.
If the router cannot identify these parameters, contact your ISP for them.
PDP Type
APN
User Name
Password
Authentication Type
Used to create an APN dial-up profile when the router fails to identify
these parameters automatically.