Tenda PH3 AV1000 User Manual

Manage Your Adapters
7
III Manage Your Adapters
This section introduces how to manage your adapters using the UI, including changing your
Powerline adapters’ device name/network name, resetting your Powerline adapters, and etc.
1 UI Installation
This section instructs you to install the adapter s’ UI on your computer.
If you are a Windows 8 user, simply follow steps below. If you are using other operation systems,
instructions herein are also good for references.
To install the UI:
Go to Tenda official website http://www.tendacn.com to download the management software.
Save it to your local host, and unzip it.
 Double click the setup icon to run the management software, and click Next when
you see the screen below.

Tenda PH3 AV1000 Specifications

General

Model	PH3
Type	Powerline Adapter
Data Transfer Rate	1000 Mbps
Encryption	128-bit AES
Button	Pair Button
Modulation Technology	OFDM
Operating Temperature	0°C to 40°C
Operating Humidity	10% to 90% non-condensing
Storage Humidity	5% to 90% non-condensing
Technology	HomePlug AV2
Operating Voltage	100-240V AC
Operating Frequency	50/60Hz
Plug Type	EU, UK, US
Standards	IEEE 802.3, IEEE 802.3u
LED Indicators	Power, Ethernet
Input	AC 100-240V~50/60Hz 0.1A
Frequency Band	2-68MHz
System Requirements	Windows, Mac, Linux
Package Content	2 x Ethernet cables, Quick Installation Guide
Ports	1 x RJ45
Interface	Gigabit Ethernet Port