Tenda PH3 AV1000 User Manual

Manage Your Adapters
18
5 Reset
Device name will be PLC Adapter, and network name will be HomeplugAV once the device resets
to factory default. You can reset the adapters here, or use the hardware button Pair button on the
device.
To reset the adapters:
 Click to start configuration.
 Select Reset.
 Select the adapter you want to reset or you can click Select All.
 Click OK to activate the settings.

Tenda PH3 AV1000 Specifications

General

Model	PH3
Type	Powerline Adapter
Data Transfer Rate	1000 Mbps
Encryption	128-bit AES
Button	Pair Button
Modulation Technology	OFDM
Operating Temperature	0°C to 40°C
Operating Humidity	10% to 90% non-condensing
Storage Humidity	5% to 90% non-condensing
Technology	HomePlug AV2
Operating Voltage	100-240V AC
Operating Frequency	50/60Hz
Plug Type	EU, UK, US
Standards	IEEE 802.3, IEEE 802.3u
LED Indicators	Power, Ethernet
Input	AC 100-240V~50/60Hz 0.1A
Frequency Band	2-68MHz
System Requirements	Windows, Mac, Linux
Package Content	2 x Ethernet cables, Quick Installation Guide
Ports	1 x RJ45
Interface	Gigabit Ethernet Port