Tenda TEF1210P-8-150W - Page 32

Link Aggregation
- 26 -
Parameter specification:
Header entry
Description
Aggregation
Algorithm
Select Aggregation Algorithm.
 Port-based ID: All member ports of the group fulfill the load sharing
based on the Port ID of the receiving data.
 Source MAC-based Address: All member ports of the group fulfill the
load sharing based on the Source MAC Address of the receiving data.
 Destination-based MAC Address: All member ports of the group fulfill
the load sharing based on the Destination MAC Address of the
receiving data.
 Source-destination-based MAC Address: All member ports of the
group fulfill the load sharing based on the Source MAC Address +
Destination MAC Address of the receiving data.
Aggregation
Group
Display the number of the aggregation group.
Member
Ports
Display the ports that can join the aggregation group in the switch. Check
the box at the front of the corresponding port number to select that port.
Status
Enable/Disable the aggregation group.