300M Wireless-N Access Point
When this feature is enabled, wireless clients
connected with the same SSID can not
communicate with each other. For example,
configure main SSID as AP1, minor SSID as
AP2. PC1 and PC2 connect to AP1 via wireless
adapter, and configure PC1 and PC2 in the
same segment. After the feature is enabled,
two PCs can not communicate and share
network resource each other, but they can
communicate with wireless clients connected
with AP2. This feature is to isolate the
communication of wireless clients
connected with the same SSID.
AP Isolation: One access control feature
based on wireless MAC address. When this
feature is enabled, each of your wireless
clients will be in its own virtual network and
will not be able to communicate with each
other. This feature is deployed when you
have many guests that frequent your
wireless network. For example, configure
main SSID as AP1, minor SSID as AP2. PC1
connects to AP1 via wireless adapter; PC2
20
To Next Page
Loading...
Need help?
General
