300M Wireless-N Access Point
connecting to AP2. After the feature is
enabled, two PCs can not communicate and
share network resource each other. This
feature is to isolate the communication
of wireless clients connected with
different SSID.
Tip: If you want to isolate all connected
wireless client's communication, please
enable MBSSID AP Isolation and AP Isolation
simultaneously.
BSSID
：
Basic Service Set Identifier of
wireless network. In IEEE802.11, BSSID is
the MAC address of wireless access point.
Channel
：
Specify the effective channel (from
1 to 13\Auto) of the wireless network.
Extension channel
：
To increase data
throughput of wireless network, the
extension channel range is used in 11n
mode.
Wireless Security Setting：
It is used to configure the AP network’s security
setting. Here presents the common ten
21
To Next Page
Loading...
