300M Wireless-N Access Point
Encryption Type
：
Select the data
encryption method from WEP, TKIP, AES or
NONE. The default is NONE.
WEP Encryp
tion Description
WEP Key 1~4
：
Set the WEP key with the
format of ASCII and Hex. You can enter
ASCII code (5 or 13 ASCII characters. Illegal
character as “/” is not allowed.) Or 10/26 hex
characters.
Default Key
：
Select one key from the four
configured keys as the current available one.
TKIP Encryption Description
Pass Phrase
：
Enter the encrypted
characters with 8-63 ASCII characters.
AES Encryption Description
Pass Phrase
：
Enter the encrypted
characters with 8-63 ASCII characters.
AP MAC Address
：
Input the MAC addresses
(no more than four) of remote access points
by manual or scan.
48
To Next Page
Loading...
