300Mbps Wireless Access Point
4.3 Advanced Settings
This section mainly deals with wireless advanced settings, including
Speed, Beacon Interval, Fragment Threshold, etc. Select “Wireless
Setting->Advanced Setting” to enter the following screen:
Setting Explanation
² BG Protection Mode For 11b/g wireless client, it is easier to
connect with 11n wireless device. The default is “Auto”.
² Basic Data Rates: In term of different requirements, you can select
one of the suitable Basic Data Rates from the drop-down menu.
Here, default value is (1-2-5.5-11Mbps…). It is recommended not to
modify the default value.
² Beacon Interval The frequency interval of the beacon, which is a
packet broadcast by an AP to synchronize a wireless network. The
default value is 100 ms.
To Next Page
Loading...
Need help?
General
