Tenda W302A - Tools; Maintenance

300M Wireless AP
24
Click Enable to enable the SNMP feature.
1. Administrator Name: Input the administrator’s name.
2. Device Name: Input the name of the AP, e.g., WIRELESS AP.
3. Location: Input the AP’s location.
4. Read Community: Indicates the community read access string to permit reading this AP’s SNMP
information. The default is Public.
5. Write/Read Community: Indicates the community write/read access string to permit reading and
re-writing this AP’s SNMP information. The default is Private.
3.7 Tools
3.7.1 Maintenance
Firmware Upgrade
Firmware upgrade is released periodically to improve the functionality of your device or to add new features.
If you run into a problem with a specific feature of the device, log on to our website (http://www.tendacn.com)
to download the latest firmware to update your device.
Click Tools > Maintenance > Firmware Upgrade to enter screen below:
To upgrade device software:
1. Launch a web browser and go to http://www.tendacn.com to download the latest firmware.
2. Unzip the compressed upgrade file (.ZIP file).
3. Click Browse to locate and select the upgrade file on your hard disk.
4. Click Upgrade to upgrade device firmware.