300M Wireless AP
7
Reset: Press it for over 7 seconds with a needle to restore factory default settings (see Appendix---3.
Default Settings.
Power Interface: Used for connecting the included power adapter.
LAN / PoE: PoE port for connecting to power supply or an IEEE 802.3at compliant PoE switch;
1000M Ethernet port for connecting to an Ethernet device such as a PC or switch, etc.
1.3 Installation Considerations
For better performance, it is advisable to place the device:
Away from electrical devices that are potential sources of interference, such as ceiling fans, home
security systems, microwaves, etc.
Away from any large metal surfaces, such as a solid metal door or aluminum studs.
Away from large expanses of other materials such as glass, insulated walls, fish tanks, mirrors, brick,
and concrete can also affect your wireless signal.
To Next Page
Loading...
