EasyManuals Logo

Tenda W302A User Manual

Tenda W302A
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #36 background imageLoading...
Page #36 background image
300Mbps Wireless Access Point
² Radius Server Enter the IP address of the Radius
server.
² Radius Server Port Enter the authentication port of the
Radius server. The default is 1812.
² Shared Secret Enter the shared key for authentication
server with 8~63 ASCII characters.
² Session Timeout The authentication interval period
between AP and authentication server. The default is
3600s.
Note: To improve security level, do not use too easy characters.
4.2.2 WDS Security Setting
WDS Security Setting is to protect the data safety of wireless bridge.
The security setup page of Point to Point Bridge and Point to Multipoint
Bridge is as the picture below.
WDS security setting provides three encryption modes: WEP encryption,
TKIP encryption and AES encryption.
² WEP Key: You can set the WEP key in ASCII code or Hexadecimal

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Tenda W302A and is the answer not in the manual?

Tenda W302A Specifications

General IconGeneral
BrandTenda
ModelW302A
CategoryWireless Access Point
LanguageEnglish

Related product manuals