Tenda W308R User Manual

11N Wireless Broadband Router User Guide
48
5.3 Wireless Access Control
Wireless access control is actually based on the MAC
address to permit or forbid specific clients to access the
wireless network.
¾ MAC address filter: “Permit” indicates to allow
the clients in the list to access the wireless network,
“Forbid” indicates to prevent the clients in the list
from accessing the wireless network.
¾ Configure MAC address: Input the MAC
addresses of the wireless clients to implement the
filter policy. Click “Add” to finish the MAC add
operation.
¾ MAC Address list: Show the added MAC
addresses. You can add or delete them.

Tenda W308R Specifications

General

Wireless Standards	IEEE 802.11n, IEEE 802.11g, IEEE 802.11b
Frequency Band	2.4 GHz
Data Rate	Up to 300 Mbps
Antenna	2 x 5dBi external antennas
LAN Ports	4x 10/100 Mbps
WAN Ports	1x 10/100 Mbps
Security	WPA, WPA2
WAN Connection Type	Dynamic IP, Static IP, PPPoE