11N Wireless Broadband Router User Guide
86
z Supports WDS to extend wireless network
z Supports virtual server, DMZ host
z Provides syslog to record the running status of the
router
Appendix 3 FAQ
This section provides some solutions to the problems
which may occur during the router’s installation or
usage. The instructions below may help you deal with
the problems. If your problem is not in the list, please
log into our website www.tenda.cn
or send an E-mail to
support@tenda.cn
, and we will reply to you at the
earliest time.
1. Can not log in to the Web-based Utility of the router
after you enter the IP address in the address field?
Step 1: Check if the router is working correctly, after
the device is powered on for a few seconds, the SYS
indicator on the front panel should light up. If it is not,
please contact us.
Step 2: Check the network cables are connected
correctly and the corresponding LED indicator lights up.
Sometimes, the indicator lights up, but it does not mean
it is functioning.
Step 3: Run “Ping” command and check if it can ping
To Next Page
Loading...
