11N Wireless Broadband Router User Guide
87
the Router’s LAN IP address 192.168.0.1 (open
“Command Prompt” and type “Ping 192.168.0.1” and
then enter). If it is OK, please make sure your browser
does not access the Internet by proxy server. If the ping
fails, you can press the “RESET” button for 7 seconds to
restore to default settings. And then repeat the ping
operation. If it still does not work, please contact us.
2. Forgot the login password and cannot enter the
Web-based Utility. What can I do?
Press the “RESET” button for 7 seconds to restore the
Router to default settings.
3. The computer connected with the Router shows
IP address conflict. What can I do?
Check if there are other DHCP servers in the LAN and if
there are then disable them. The default IP address of
the router is 192.168.0.1 please maker sure the
address is not being used by any other device. If there
are two computers with the same IP address, please
change one of them.
4. I cannot use E-mail and access the Internet.
What can I do?
Sometimes happens with ADSL connection and
Dynamic IP users. You may need to modify the default
MTU value (1492). Please open the “WAN Setting” and
modify the MTU value with the recommended value as
To Next Page
Loading...
