11N Wireless Broadband Router User Guide
88
1450 or 1400.
5.How to share my computer’s resource with
other users in Internet？
If you want Internet users to access the internal server
via the router such as: e-mail server, Web, FTP. You can
configure the “Virtual Server”.
Step 1: create your internal server, make sure the LAN
users can access these servers and know related service
port. For example, Web server’s port is 80; FTP is 21;
SMTP is 25 and POP3 is 110.
Step 2: In the router’s web click “Virtual Server” and
select “Port Range Forwarding”.
Step 3: Input the service port provided by the router
(i.e. the external port) for mapping the internal and
external network, for example, 80-80.
Step 4: input the internal Web service port, for example,
80-80.
Step 5: Input the internal server’s IP address. For
example, if your Web server’s IP address is
192.168.0.10, please input it.
Step 6: select the communication protocol used by your
internal host: TCP, UDP, Both.
Step 7: click “Ok” to activate the settings.
The following table lists some well-known applications
and their respective service ports:
Server Protocol
Service Port
To Next Page
Loading...
Need help?
General
