Tenda W308R User Manual

11N Wireless Broadband Router User Guide
50
premise of activating “Obtain an IP Address
Automatically”. So specifying the start and end address
of the IP Address pool is needed.
¾ DHCP server: Check the Enable box to enable
DHCP server.
¾ IP pool start/end address: Enter the range of IP
addresses for DHCP server distribution.
¾ Lease time: It indicates the valid time of the
dynamic IP address which is distributed to the
DHCP client’s host computer by DHCP server.
During this time, the server will not distribute the
IP address to any other host computer.
6.2 DHCP Client List
DHCP client list displays user computer’ IP address,
MAC address, host name and other information which

Tenda W308R Specifications

General

Wireless Standards	IEEE 802.11n, IEEE 802.11g, IEEE 802.11b
Frequency Band	2.4 GHz
Data Rate	Up to 300 Mbps
Antenna	2 x 5dBi external antennas
LAN Ports	4x 10/100 Mbps
WAN Ports	1x 10/100 Mbps
Security	WPA, WPA2
WAN Connection Type	Dynamic IP, Static IP, PPPoE