Tenda W308R User Manual

11N Wireless Broadband Router User Guide
66
¾ Enable: Check to enable remote web
management.
¾ Port: The management port open to outside
access. The default value is 80.
¾ IP Address: Specify the range of the IP addresses
of the computers on the Internet for remote
management.
NOTE:
1. If you want to log in the device’s Web-based
Utility via port 8080, you need to use the format of
WAN IP address: port (for example http ：
//220.135.211.56:8080) to implement remote login.
2. If your WAN IP address starts and ends with
0.0.0.0, it means all hosts on the Internet can
implement remote Web management. If you
change the Internet IP address as
218.88.93.33-218.88.93.35, then only the
computers at the IP addresses of 218.88.93.33,
218.88.93.34 and 218.88.93.35 can access the

Tenda W308R Specifications

General

Wireless Standards	IEEE 802.11n, IEEE 802.11g, IEEE 802.11b
Frequency Band	2.4 GHz
Data Rate	Up to 300 Mbps
Antenna	2 x 5dBi external antennas
LAN Ports	4x 10/100 Mbps
WAN Ports	1x 10/100 Mbps
Security	WPA, WPA2
WAN Connection Type	Dynamic IP, Static IP, PPPoE