To Next PageTo Next Page
Need help?Do you have a question about the Tennant CS5 and is the answer not in the manual?
General| Power Source | Battery |
|---|---|
| Battery Voltage | 24 V |
| Sound Level | 68 dBA |
| Machine Type | Walk-Behind |
| Machine Width | 22 inches |
Guidelines for proper and safe operation of the machine.
Precautions to prevent electrical hazards during operation and maintenance.
Safety measures to prevent fire hazards related to flammable materials.
Warnings and precautions to prevent personal injury during use.
How incorrect usage can damage the machine and void warranty.
Safe handling and charging procedures for the battery and charger.
Essential safety measures for handling and charging the machine's battery.
Detailed measurements (X, Y, Z) and packing size of the machine.
Explains the manual's purpose and its importance for safe operation.
Information found on the machine's nameplate for identification.
Lists the documents and items included with the machine.
Overview of the scrubber dryer's function and capabilities.
Identifies the main components of the machine with figure references.
Lists available optional and standard accessories for the machine.
Instructions for safely moving the machine when it is on a pallet.
What to check upon receiving the machine to ensure its condition.
Step-by-step guide for safely unpacking the machine.
How to choose and prepare a safe parking location for the machine.
Procedures for lifting and moving the machine manually.
How to move the machine using its wheels.
How to adjust the handle's angle for comfortable operation.
Instructions for attaching the brush or pad driver.
How to detach the brush or pad driver.
Detailed steps for battery setup, installation, and charging.
Steps for safely removing the battery from the machine.
Proper procedures for disposing of the battery environmentally.
Steps to take before starting operation to ensure readiness.
Identification and function of the machine's controls and indicator lights.
How to operate the machine for scrubbing and drying.
Specific steps for the drying function of the machine.
Instructions for filling/emptying water/detergent and dirty water tanks.
How to adjust the machine's drive for different conditions.
Final steps for completing work and preparing the machine for storage.
Steps to take when the machine will not be used for a long time.
Basic precautions to observe during all maintenance tasks.
Instructions for cleaning suction floats, filters, and hoses.
Cleaning, adjusting squeegees, and replacing blades/brushes.
