To Next Page
D
Dawn RichJul 26, 2025
What to do if Tennant T12 has trailing water or poor water pickup?
- DdenniskramerJul 26, 2025
If your Tennant Scrubber is leaving water behind or not picking it up well, several factors could be responsible. The squeegee blades might be worn (rotate or replace them), the squeegee may be out of adjustment (adjust it), or the squeegee assembly could be clogged (clean it). Additionally, check for a loose or clogged vacuum hose (secure or flush it), a damaged vacuum hose (replace it), a dirty vacuum fan inlet filter (clean it), debris caught on the squeegee (remove it), a disconnected or damaged vacuum hose to the squeegee or recovery tank (reconnect or replace it), a tank cover that is not completely closed (check for obstructions), or torn seals on the recovery tank (replace them).
General
