Why is ec?H2O warning light solid red on Tennant T16 Scrubber?
If the ec?H2O warning light is solid red on your Tennant Scrubber, it might be a defective solution pump, so replace the solution pump.
Why Tennant Scrubber has poor scrubbing performance?
If your Tennant Scrubber has poor scrubbing performance, start by checking for debris caught on the scrub brushes and remove it. If the issue persists, the wrong detergent or brush may be in use; contact a TENNANT representative for recommendations. Worn scrub brushes should be replaced. Excessive brush pressure can also cause this, so reduce the scrub brush down pressure. Ensure even brush pressure by leveling the scrub head. For cylindrical scrub heads, check for broken brush drive belts and replace them if necessary. Lastly, ensure the battery is fully charged until the charger automatically turns off.
General| Power Source | Battery |
|---|---|
| Brush Down Pressure | Up to 200 lb / 91 kg |
| Cleaning Path Width | 36 in / 900 mm |
| Battery Voltage | 36 V |
| Travel Speed | 3.5 mph |
To Next Page
