EasyManuals Logo

Tentacle TRACK E User Manual

Tentacle TRACK E
27 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
14
SETTINGS
Device name Change the predefined device name by simply
clicking on the name field, change the name and
confirm with ‚return
Note: Creating a new device name will create
a new folder on your microSD card named
after this device.
Recording format
48 kHz / 32-bit Float
48 kHz / 24-bit
This format records 32-bit float WAV. files
Adjusting the recording gain is not required. As
long as maximum input levels are not exceeded,
both quiet and loud sounds can be recorded
with high quality. This 32-bit float recording will
disable the limiter
This format records standard 24-bit WAV. files.
Adjust the recording gain, so that the clip
indicators do not light up red while recording. In
the 24-bit format, the limiter is always enabled
Headphone volume Tap on the little speaker icon and adjust the
volume of the headphone output
*
*
Note: US version has the headphone output
deactivated during recording
LED Brightness Adjust the brightness of the LEDs here
LED while
Recording
Here you can deactivate the level LED
completely during recording

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Tentacle TRACK E and is the answer not in the manual?

Tentacle TRACK E Specifications

General IconGeneral
Connector3.5 mm TRS
ConnectivityBluetooth
Weight30 g
Sample Rate48 kHz
Timecode FormatsLTC
Battery TypeLithium Polymer
Charging Time2 hours
Power SupplyUSB-C