15
User Switch
Assignment
Not used
Start / Stop
Playback
Start / Stop
Recording
Click on the field and select an action for your
user switch on the TRACK E when pulling it up
No action will happen, if user switch is pulled up
You can now listen to your last recorded file
when the user switch is pulled up
This action is preset and allows you to manually
Start / Stop an audio recording via user switch
Format SD Card To format your SDcard, just press the button
and confirm it in the pop-up window
General
information
Firmware Version
Hardware Revision
Hardware Serial No.
App Version
Real Time Clock
(RTC)
Shows the current firmware version running on
the device
Shows the hardware version of this unit
Shows the serial number of your TRACK E
Shows the current software version of your setup app
Shows the current time and date of the internal
real time clock
Limiter The limiter icon is only visible in your monitoring
view. If you select 48 kHz / 24-bit recording
format, the limiter is enabled. In 32-bit float it will
be disabled.
The limiter will compress the dynamic range, so
that sudden volume peaks can be prevented.
To Next Page
Loading...
Need help?
General