GB
English
Instruction Manual
Multi 250 - 400K - 500F - 500K - 500 MAR e Accessories
11.3 Multi 500K DUO Multi 500KT DUO without cooling unit
On the wire feeder unit you can choose between:
MIG-MAG (synergic)
PULSED MIG (synergic)
PULSED MIG (synergic/
double pulsed)
MIG-MAG (manual)
MMA
Job transfer from main generator
to wire feeder unit or viceversa is
released automatically switching
the corresponding torch trigger,
pushing the knob on the main
panel or any key on the wire
feeder panel.
When the main generator torch is working, the remote wire feeder unit will display
“INT CNT” meaning someone is using the main unit.
Once welding mode is choosed, the machine will always recall the last used pro-
gram or the last used setting.
12. MULTI 500F - MULTI 500F WATER COOLING
It can be equipped with cooling unit and can work as standard MMA and TIG DC
power source.
On the generator main panel you
can select between:
MMA (manual or synergic)
TIG (manual or synergic)
PULSED TIG (manual or synergic)
while from remote wire feeder unit:
MIG-MAG (synergic)
PULSED MIG (synergic)
PULSED MIG (synergic/double pulsed)
MIG-MAG (manual)
MMA
Every welding job can work with specic dierent programs, set from the generator
main panel.
Job transfer from main generator to wire feeder unit or viceversa is released automati-
cally switching the corresponding torch trigger, pushing the knob on the main panel or
any key on the wire feeder panel.
When the main generator torch is working, the remote wire feeder unit will display “INT
CNT” meaning someone is using the main unit.
Once welding mode is choosed, the machine will always recall the last used program
or the last used setting.
Pulsed
MIG
Sinergyc
MIG
MIG PULS
Sinergyc
MMA
VRD
MMA
CELLULOSIC
Sinergyc
TIG
TIG LIFT
DC
Sinergyc
MIG
MIG
Manual
Manual
Double
Pulsed
MIG
Pulsed
TIG
Manual
Pulsed
MIG
Sinergyc
MIG
MIG PULS
Sinergyc
MMA
VRD
MMA
CELLULOSIC
Sinergyc
TIG
TIG LIFT
DC
Sinergyc
MIG
MIG
Manual
Manual
Double
Pulsed
MIG
Pulsed
TIG
Manual
9
To Next Page
Loading...
