HOW MANY RECEIVERS CAN I LINK TO ONE BOLT K TRANSMITTER?
You can link up to six Bolt 4K receivers to any one Bolt 4K transmitter.
CAN I INSTALL BATTERY PLATES ON MY BOLT K UNITS MYSELF?
Yes. Recent changes to the device's chassis allows the user to assemble and install
battery plates on either the receiver or transmitter. Earlier Bolt 4k units required
battery plates to be installed only by a trained technician at a Certified Teradek
Repair Center. Contact Teradek to verify if your device's metal work is the latest.
WHAT ARE THE A/C POWER REQUIREMENTS FOR BOLT K?
Bolt 4K devices require more power than any of our previous products. When
powering Bolt 4K from an A/C outlet, use only the included A/C adapter. This
A/C adapter has a higher voltage capacity that meets Bolt 4K’s increased power
requirements. Lower rated A/C adapters are not supported, and using one will
aect Bolt 4K’s performance and capabilities.
NOTE: These requirements only apply if you are using an A/C outlet to power on Bolt
4K. Using a compatible battery and accessory cable as a power source will not aect
Bolt 4K’s performance.
Supported A/C adapters:
● 9V 2.0A (18W)
● 12V 1.5A (18W)
● 12V 3.0A (included with Bolt 4K)
● 12V 2.5A (30W)
● 24V 2.5A (60W)
Not supported:
● 12V 1.25A (15W)
24
To Next Page
Loading...
