Teradek Bolt 4K MAX - Technical Specifications; Video and Audio Specifications

TECHNICAL SPECIFICATIONS
BOLT K TX BOLT K RX
VIDEO
Video Inputs
12G-SDI SMPTE 2082-1 standard/75 Ω,
1x HDMI 2.0 Type-A receptacle
N/A
Video Outputs
1x Loopout 12G-SDI SMPTE 2082-1
standard/75 Ω
2x 12G-SDI SMPTE 2082-1 standard/75 Ω,
1x HDMI 2.0 Type-A receptacle
SDI Ancillary
Data Support
Supports transmitting metadata, timecode, and start/stop
flags from certain camera manufacturers.
Color Sampling
SDI: YCbCr 4:2:2
10-Bit/HDMI: RGB 4:4:4, 8-bit
SDI: YCbCr 4:2:2
10-Bit/HDMI: RGB 4:4:4, 8-bit
Delay (TX to RX) <0.001sec (without format conversions) <0.001sec (without format conversions)
Supported
Resolutions
4Kp23.98/24/25/29.97/30/50/59.94/60
1080p23.98/24/25/29.97/30/50/59.94/60
1080psf23.98/24/25/29.97/30
1080i50/59.94/60
720p50/59.94/60
480p59.94/576p50 (via HDMI ports only)
480i (NTSC)/576i (PAL)
4Kp23.98/24/25/29.97/30/50/59.94/60
1080p 23.98/24/25/29.97/30/50/59.94/60
1080psf23.98/24/25/29.97/30
1080i50/59.94/60
720p50/59.94/60
480p59.94/576p50 (via HDMI ports only)
480i (NTSC)/576i (PAL)
Input Cross
Conversion
Yes, HDMI to SDI N/A
Output Video
Scaling
N/A Yes, Framerate and Resolution Scaling
VIDEO PROCESSING
Video
Compression
Visually lossless N/A
Test Pattern
Generator
N/A Yes
Video Format
Conversion
Support
Yes Yes
Spectrum
Analyzer
N/A Yes
Color Correction N/A 17x17x17 3D LUT
AUDIO
Audio
Compression
48kHz 24-bit PCM 48kHz 24-bit PCM
Audio Input
Embedded SDI/HDMI Audio Input
(2 channel)
N/A
Audio Output N/A
Embedded SDI/HDMI Audio Input
(2 channel)
BOLT 4K SYSTEM
26