Terberg OMNIDEKA e - Page 26

26 EN
EN
3. Bin lift operation
37878
05-2017
3.11.4 Diagnostic System - level 4 (continued)
End of warranty date, Historical alarms, Time and date
ã Terberg Machines B.V., IJsselstein, The Netherlands
All rights reserved. No part of this book may be reproduced, stored in database or retrieval system, or published, in any form or in any way,
electronically, mechanically, by print, photoprint, microfilm or any other means without prior written permission from the publisher.
ENTER CODE ENTER CODE ENTER CODE ENTER CODE END OF WARRANTY DATE DD/MM/YY
0
1 0 1 0 0 1 0 0 3
confirm withchange with confirm withchange with confirm withchange with confirm withchange with
ENTER CODE ENTER CODE ENTER CODE ENTER CODE HISTORICAL ALARMLIST
0
1 0 1 0 0 1 0 0 4
confirm withchange with confirm withchange with confirm withchange with confirm withchange with
01: EMERGENCY 1 STOP DATE DD/MM TIME HH/MM
with keys you can display the
next / previous message
ENTER CODE ENTER CODE ENTER CODE ENTER CODE DATE DD/MM/YY TIME HH:MM:SS
0
1 0 1 0 0 1 0 0 5
confirm withchange with confirm withchange with confirm withchange with confirm withchange with
system date and GMT time
view
“END OF WARRANTY DATE”
enter code “1003”
view
“HISTORICAL ALARM LIST”
enter code “1004”
view
“TIME and DATE”
enter code “1005”
Level 4 - Configuration (continued)
1x
CONFIGURATION SBC10.V21 r6 CONFIGURATION
the firmware version is displayed
TCA-PNP V1.0
*TERBERG OMNIDEKA*
DATE DD/MM/YY
MONITOR
push 2x
CONFIGURATION SBC10.V21 r6 CONFIGURATION
the firmware version is displayed
TCA-PNP V1.0
*TERBERG OMNIDEKA*
DATE DD/MM/YY
MONITOR
push 2x
CONFIGURATION SBC10.V21 r6 CONFIGURATION
the firmware version is displayed
TCA-PNP V1.0
*TERBERG OMNIDEKA*
DATE DD/MM/YY
MONITOR
push 2x
push 2x