Terberg OmniDEL - 5.10 Loading Bags; Bulky Waste; 5.11 Travel Height Function

34
ã Terberg Machines B.V. IJsselstein, The Netherlands
All rights reserved. No part of this book may be reproduced, stored in database or retrieval system, or published, in any form or in any way,
electronically, mechanically, by print, photoprint, microfilm or any other means without prior written permission from the publisher.
5.10 Loading bags / bulky waste
To make it easier to throw in bags and/or bulky waste, the throw-in height of the bin lift can be adjusted.
1) Unlock the hopper plate; lift the hopper plate up a little using handle bar A.
2) Push support B backwards.
3) Turn the hopper plate down fully.
5.11 Travel height
In order to prevent damage to the bin lift, the OmniDEL and the OmniDEL e are fitted standard with this
function.
When this function is switched on both lifting chairs move to a pre-set position.
- Press the black button, on the left- or righthand side of the bin lift. Both lifting chairs will move to the travel
height.
A
B
Do not forget to raise the hopper plate again
before collecting bins.