Terberg OmniDEL User Manual

3
3
4
4
5
5
6
6
7
8
9
10
12
10
11
8
2
1
13
13
1. Introduction
1.1 Description of the bin lift system
The Omni DEL and Omni DEL e are automatic bin lifts that can be deployed for a wide range of uses.
They are not only suitable for emptying the commonly used 2-wheel bins but also most 4-wheel containers.
The optional pick-up arms make it possible to empty refuse bins that are not fitted with a comb receiver pick-up
edge.
4
ã Terberg Machines B.V. IJsselstein, The Netherlands
All rights reserved. No part of this book may be reproduced, stored in database or retrieval system, or published, in any form or in any way,
electronically, mechanically, by print, photoprint, microfilm or any other means without prior written permission from the publisher.
1. 8 Position button control station R/H*
2. 8 Position button control station L/H*
3. Safety arm
4. Startsensor
5. Pick-up comb
A
B
11. Sensor 4-wheel container recognition
12. Diagnostic System*
13. Light screen (option)
6. Bin security switch
7. Hopper plate
8. Emergency stop
9. Catcherbar / Lid opener
10. Bin guide plate
2
1
* Depending on the country: - The L/H and R/H control stations are interchanged.
- The Diagnostic System is placed on the L/H or R/H side of the bin lift.
DIN pick-up arms can
also be fitted as an option.

Terberg OmniDEL Specifications

General

Brand	Terberg
Model	OmniDEL
Category	Lifting Systems
Language	English