Chapter Overview
This chapter contains information on how to download and use the service tool for the PT-100G Compact Track
Loaders.
Service Tool
The service tool is a computer application (.exe file) made available by Sauer-Danfoss. It can be used to:
• Diagnose machine malfunctions • Update Software Versions
• Calibrate machine parameters
You must have a laptop computer meeting the minimum requirements set forth by Sauer-Danfoss and a service
tool programming cable (available from your Terex Dealer) to connect your computer to the onboard system of
your machine.
Download the service tool by visiting:
www.sauer-danfoss.com
Steps:
1. Select: Products
2. Select: Mobile Electronics
19. Service Tool
19-1
Personal Safety
Improper or incomplete maintenance/repair of a Compact Track Loader can be dangerous and may result in
machine damage, injury or death.
Do not attempt to perform any type of repair or maintenance on a Compact Track Loader until you have read and fully
understood the information in this manual. Refer to the Operation and Maintenance manual for instructions regarding
proper machine operation techniques before operating any Compact Track Loader.
Prior to performing any type of service work on a Compact Track Loader, read and understand Chapter 1 (Product Safety)
for personal safety information.
To Next Page
Loading...
