EasyManua.ls Logo

Terracom IPSM-2C20 - About This Manual; Safety Instructions & Declaration

Default Icon
72 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
© 2022 Enter your company name
1 About This Manual
This user manual will explicitly describe the hardware installation and the software configuration,
provides installers and users the necessary information to setup and configure the system.
Firmware version:
Model
Version
IPSM-2C20, IPBX-2C20
v0.0.0.1
1.1 Safety Instructions & Declaration
Do not expose the device to extreme temperatures, direct sunlight, humidity, or dust, which could
cause fire or electrical shock hazard.
Keep away water or other liquids from the device. Otherwise fire or electrical shock may result.
Connect the power cord only to an AC outlet of the type stated in this owner's manual or as marked
on the unit. Otherwise fire and electrical shock hazard results.
Avoid touching power plugs with wet hands. Doing so is a potential electrical shock hazard.
Take care for correct polarity when operating the device from a DC power source. Reversed polarity
may cause damage to the unit or the batteries.
Avoid placing heavy objects on power cords. A damaged power cord is a fire and electrical shock
hazard.
Do not cut, scratch, bend, twist, pull, or heat the power cord. A damaged power cord is a fire and
electrical shock hazard. Ask your TERRACOM dealer for replacement.
Turn off immediately the unit, remove the power cord from the AC outlet and consult your TERRACOM
dealer in any of the following circumstances:
o Smoke, odor, or noise getting out of the unit.
o Foreign objects or liquids get inside the device.
o The unit has been dropped or the shell is damaged.
o The power cord is damaged.
o If you continue using the device, fire and electrical shock may result.
Do not drop or insert metallic objects or flammable materials into the unit as this may result in fire and
electrical shock.
Do not remove the device's cover, as there are exposed parts inside carrying high voltages that may
cause an electrical shock. Contact your TERRACOM dealer if internal inspection, maintenance, or
repair is necessary.
Do not try to make any modifications to the device. This is a potential fire and electrical shock hazard.
Avoid the device's ventilation slots to be blocked. Blocking the ventilation slots is a potential fire
hazard.
To prevent the unit from falling down and causing personal injury and/or property damage, avoid
installing or mounting the unit in unstable locations.
Leave enough space above and below the unit to provide good ventilation of the device. If the airflow is