6.4 Setting mode
Pressing the SET key for 2 seconds to enter setting model,the basic
settings can now be performed in the following order:
6.4.1 BEEP:
- Press the SET key for 2 seconds to select the beep section, ON/OFF
section digits will start flashing, press the WIND/+ or PRESSURE/-
key to select ON or OFF.
“BEEP ON” will make the Beep sound on every key press. If you do not
want the beep sound to be heard, select “BEEP OFF”
6.4.2 MAX/MIN Daily:
- Press the SET key twice to select the MAX/MIN Daily section,
ON/OFF section digits will start flashing, press the WIND/+ or
PRESSURE/- key to select ON or OFF . (Default is ON,ON: clear at
0:00 every day).
6.4.3 Time / Date
- Press the SET key third time to select the 12/24 hour format section
(default: 24hr).
- Press the SET key forth time to select the hour section.
- Press the SET key fifth time to select the minutes section.
- Press the SET key sixth time to select DD-MM or MM-DD format.
(Default DD-MM format)
- Press the SET key seventh time to select year.
- Press the SET key eighth time to select month.
- Press the SET key ninth time to select day.
To Next Page
Loading...
Need help?
General
