seconds).
5. Replace the batteries.
6.8.2 Register New Transmitter
Press and hold the LIGHT /SNOOZE button for 5 seconds, and the
console will re-register the wireless sensor.
6.8.3 Backlight Operation
1) With AC adaptor.
The backlight can only be continuously on when the AC adapter is
permanently on. When the AC adapter is disconnected, the backlight
can be temporarily turned on.
Press the LIGHT SNOOZE key to adjust the brightness between High,
Low and Off.
2) Without AC adaptor
To reduce power consumption, the display console will automatically
enter sleep mode and will not send data to the Internet if no key is
pressed for 15s. Hold the LIGHT /SNOOZE key in sleep mode or plug
in the DC adapter wake up equipment.
6.8.4 Tendency indicators
Tendency arrows allow you to quickly determine of temperature or
pressure are rising and falling in a three hour update period, updated
every 30 minutes.
Eg. : At 3:00 - compare to 12:00 data; at 3:30 -compare to 12:30 …..
etc
To Next Page
Loading...
Need help?
General
