- In normal mode,press and release the RAIN key to view rain of rate,
event, day, week, month and total.
- Press the RAIN key for 2 seconds to reset current display rain.
Note:
◼ Reset week rain, will auto reset day rain
◼ Reset month rain, will auto reset week and day rain.
◼ Reset total rain, will auto reset month, week and day rain.
Note:
◼ Rain rate: the last 10 minutes rainfall multiplication 6.
◼ Rain event: It start to record the rain event value form the rain falls,
the rain event is over and value reset to 0 if last 24 hour rainfall
less 1mm and the last 1 hour no rainfall..
◼ Day: defined by calendar day i.e. 0:00 - 24:00 with current date.
◼ Week: defined by calendar week i.e. Sunday – Saturday.
◼ Month: defined by calendar Month i.e. January 1 - January 31.
◼ Total: running total since station was powered up
Note: the transmitter will send the wind speed, wind direction, rainfall
every 16 second
6.4.9 Moon phase
- Press the SET key 16th to select Northern or Southern Hemisphere.
6.5 Alarm mode
6.5.1 Display of Alarm value
1) Press and release ALARM key to display high alarm
To Next Page
Loading...
Need help?
General
