4. Make sure your time zone is set properly. If
incorrect, you may be reporting old data, not
real time data.
5. Check your router firewall settings. The
console sends data via Port 80.
1. Check for WiFi symbol on the display. If
wireless connectivity is successful the WiFi
icon will be displayed in the time field.
2. Make sure your modem WiFi settings are
correct (network name, and password).
3. Make sure the console is plugged into AC
power. The console will not connect to WiFi
when powered by batteries only.
4. The console only supports and connects to
2.4 GHz routers. If you own a 5 GHz router,
and it is a dual band router, you will need to
disable the 5 GHz band, and enable the 2.4
GHz band.
5. The console does not support guest
networks.
To Previous Page
Loading...
Need help?
General
