16 • RADIO 3SIXTY
Set up/Connection
NOTICE
If the device is subjected
to warm temperatures after
being cold (e.g. after trans-
port), condensation may occur
inside of it.
– In this case, wait approx.
2hours before you connect
and activate it.
Location tips
• Select a stable, level base.
• Make sure that the environment is
clean and free from dust.
• Select a location away from heat
sources and direct sunlight.
• Do not place any heavy objects on
the cables or the device.
CAUTION
Risk of injury/damage!
– Lay the cables so that they
do not pose a tripping
hazard.
Protective film
Upon delivery, the display panel is
protected with a film, which also acts
as a quick guide.
You can pull the protective film off:
1. Switch the RADIO 3SIXTY off.
2. Take hold of the film by the red tab
on the top left and slowly pull the
film off diagonally downwards.
To Next Page
Loading...
