Texas Instruments MathPrint TI-30X Plus - Resizing Display Screen Panel; Adjusting Emulator and Toolbar Positions

17
6 Trigonometry
Press w to choose an angle mode from the mode screen. Note that DEG is the default.
Press t > > to display the DMS menu.
Example
Use the TI-30X Plus MathPrint™ in radian mode to convert
45
to radians.
Keystrokes and solution:
Press w > n to be in radian mode.
Enter
45
and press t > > 1 n.
π
45
4
=
Example
Use the TI-30X Plus MathPrint™ to convert
62.4
to an angle expressed in degrees,
minutes and seconds. (Here angle mode is set to DEG.)
Keystrokes and solution:
Enter
62.4
and press t > > 6 n.
62.4 62 24

 = 
Note: The default calculation mode is
decimal degrees.