Texas Instruments TI-34 - MultiView Scientific Calculator User Manual

23
Angle menu
%=
%= displays the choice of two submenus that enable
you to specify the angle unit modifier as degrees (º), minutes
('), seconds ("), radian (r), or convert units using
4DMS. You
can also convert between rectangular coordinate form (R) and
polar coordinate form (P).
Choose an angle mode from the mode screen. You can
choose from DEG (default) or RAD. Entries are interpreted
and results displayed according to the angle mode setting
without needing to enter an angle unit modifier.
If you specify an angle unit modifier from the Angle menu, the
calculation is performed in that angle type, but the result will
be given in the angle mode setting.
Examples
RAD q " <
- %B 1
30 %= 1 E <
DEG q <
Ä Å Æ - 2 g %= 4
<
4DMS
1 8 5 %= 5 <

Texas Instruments TI-34 - MultiView Scientific Calculator Specifications

General

Display Type	LCD
MathPrint	Yes
Fraction Calculations	Yes
Complex Number Calculations	No
Statistical Functions	Yes
Equation Solving	Yes
Matrix Calculations	No
Display	4-line display
Power Source	Battery
Key Features	fraction/decimal conversion
Memory	7 variables