Texas Instruments TI-83-Plus User Manual

TI-83 Plus NoteFolio™ App Page 10
Menu with unavailable (disabled) commands
Key Considerations
You can enter and edit text in the NoteFolio™ App with either the
TI-83 Plus keypad or the TI Keyboard. If you use the NoteFolio
App without a TI Keyboard, you cannot use shortcut key
combinations using the 2 modifier key.
The diamond key (2) on the TI Keyboard acts as a modifier key,
similar to Control, Alt, or Command keys on other keyboards. The
NoteFolio App uses keyboard commands in which you hold down
the 2 key and then press another key. In this guidebook, that key
combination is shown as the diamond symbol followed by the
other key. For example, you can press 2Q to quit the NoteFolio
App. The square key (0) is not used in the NoteFolio App.
Cut, Copy, and Paste
commands are
currently unavailable.

Texas Instruments TI-83-Plus Specifications

General

Display Type	LCD
Display Resolution	96 x 64 pixels
Power Source	4 AAA batteries
Programming Language	TI-BASIC, Z80 Assembly
Backup Power	CR1616 or CR1620 lithium battery
RAM	24 KB
Processor	Zilog Z80
Weight	7.4 oz (210 g) with batteries
Dimensions	7.3 x 3.5 x 0.9 inches