Texas Instruments TI-83-Plus User Manual

TI-83 Plus NoteFolio™ App Page 45
Installation Error Messages
Low Battery
Do not attempt to download a Flash application if the low-battery
message appears on the Home screen. Low battery indication is
shown on the initial screen. If you receive this error during an
installation, change the batteries before starting the installation
again.
Invalid Signature or Certificate
Electrical interference may have caused a link to fail. Try to install
the application again.
Error in Xmit
This problem is usually associated with the unit-to-unit cable and
its connection between the handhelds. Make sure the cable is
firmly inserted in the link port of each handheld.

Texas Instruments TI-83-Plus Specifications

General

Display Type	LCD
Display Resolution	96 x 64 pixels
Power Source	4 AAA batteries
Programming Language	TI-BASIC, Z80 Assembly
Backup Power	CR1616 or CR1620 lithium battery
RAM	24 KB
Processor	Zilog Z80
Weight	7.4 oz (210 g) with batteries
Dimensions	7.3 x 3.5 x 0.9 inches