Texas Instruments TI-84 Plus C User Manual

Getting Started with the TI-84 Plus C Silver Edition 19
Radian mode interprets angle values as radians. Answers display in
radians.
Degree mode interprets angle values as degrees. Answers display in
degrees.
FUNCTION, PARAMETRIC, POLAR, SEQ
Graphing modes define the graphing parameters. Chapters 3, 4, 5, and 6
in the guidebook describe these modes in detail.
Func (function) graphing mode plots functions, where Y is a function of
X (Chapter 3).
Par (parametric) graphing mode plots relations, where X and Y are
functions of T (Chapter 4).
Pol (polar) graphing mode plots functions, where r is a function of q
(Chapter 5).
Seq (sequence) graphing mode plots sequences (Chapter 6).
THICK, DOT-THICK, THIN, DOT-THIN
THICK plotting mode is a quick way to reset all Y= line styles to a thick
line connecting each point calculated for the selected functions. You can
change individual line styles in the Y= editor.
Note: The T
HICK plotting mode on the TI-84 Plus C is equivalent to the
CONNECTED plotting mode on the TI-84 Plus graphing calculator.
DOT-THICK plotting mode is a quick way to reset all Y= line styles to a
large dot and plots only the calculated points of the selected functions.
You can change individual line styles in the Y= editor.
Note: The
DO
T-THICK plotting mode on the TI-84 Plus C is equivalent to
the DOT plotting mode on the TI-84 Plus graphing calculator. You can
change individual line styles in the Y= editor.
THIN plotting mode is a quick way to reset all Y= line styles to a thin line
connecting each point calculated for the selected functions.
Note: Use THI
N
plotting mode for function graphing when looking at
any functions which asymptote to an axis.
DOT-THIN plotting mode is a quick way to reset all Y= line styles to a
small dot and plots only the calculated points of the selected functions.
You can change individual line styles in the Y= editor.
SEQUENTIAL, SIMUL
Sequential graphing-order mode evaluates and plots one function
completely before the next function is evaluated and plotted.

Texas Instruments TI-84 Plus C Specifications

General

Display Type	Color LCD
Screen Resolution	320 x 240 pixels
Color Depth	16-bit
Connectivity	USB
Programming Language	TI-BASIC, Z80 Assembly
Battery Type	Rechargeable
Weight	7.4 ounces
Dimensions	7.5 x 3.5 x 0.8 inches