Texas Instruments TI-84 Plus CE - Bringing a Calculator out of Test Mode

9. In memory management (y L, 2:Mem Management/Delete...),
disabled files will display with the not equal sign.
Bringing a Calculator Out of Test Mode
You can re-enable all disabled calculator files by using one of the following
methods:
• Link two TI-84 Plus CE graphing calculators using a unit-to-unit USB cable
and then transfer a file by using y 8, SEND RECEIVE
-or-
• Use the TI TestGuard™ App re-enable feature.
Notes:
To clear a calculator of files created during an exam, use the following two-step
process:
If you do not need to clear files, use step 2 below:
1. Reset calculator files.
a) Turn off the calculator while in test mode.
b) "Re-Press-to-Test" - press and hold down the ~, |, and É keys, and
then release.
Using Press-to-Test 65