100 Connecting Handhelds and Transferring Files
Connecting Two TI-Nspire™ Handhelds with the Mini-USB Cable
You can connect two handhelds as long as both handhelds are using the same
keypad. You cannot connect a handheld using the TI-Nspire™ TI-84 Plus
keypad to a handheld using the native TI-Nspire™ keypad.
The TI-Nspire™ handheld USB
port is located in the centre on
the top of the TI-Nspire™
handheld.
The USB port is located on the
top of the TI-Nspire™ CX
handheld on the right side when
holding the handheld with the
screen facing you.
À
Port for connecting a wireless adapter.
Á
USB port on the CX handheld.
To connect the handhelds:
1. Firmly insert either end of the mini-USB cable into the USB port.
2. Insert the other end of the cable into the receiving handhelds’s USB port.
Connecting the TI-Nspire™ Handheld to a Computer
1. Firmly insert the mini-USB end of the cable into the port at the top of your
handheld.
To Next Page
Loading...
