Texas Instruments TI-Nspire Getting Started

The Handheld Setup dialogue box opens.
2. Presseuntil the desired category is highlighted.
3. Press¢to view the list of possible settings.
4. Press¤to highlight the desired setting.
5. Press xor· to select the new setting.
6. When you have changed all the settings to suit your needs, press euntil
OK is highlighted, and then pressxor·to apply your changes.
Note: Click Restore to return the handheld to the factory settings.
Note: When operating in TI-84 mode, you cannot modify the power standby or
hibernate options. TI-84 mode will follow the same power settings established
within the TI-Nspire™ native mode.
Customising Document Settings
Document settings control how the handheld displays and interprets
information in TI-Nspire™ documents and in Scratchpad. All numbers, including
elements of matrices and lists, are displayed according to the document
settings. You can change the default settings at anytime and you can also
specify settings for a particular document.
Document settings and their possible values are listed in the following table.
Configuring Handhelds 87

Texas Instruments TI-Nspire Specifications

General

Type	Display
Form factor	Pocket
Product color	Blue, White
Display resolution	320 x 240 pixels
Display size (HxV) (imperial)	0 \
Compatible operating systems	Windows Vista/XP Mac OS X 10.4/10.5
Battery type	AAA
Number of batteries supported	4

Weight and Dimensions

Dimensions (WxDxH)	100 x 198.3 x 28.7 mm