Texas Instruments TI-Nspire Getting Started

124 Updating the Handheld Operating System
Shown
on:
Message and Description
Receiving
handheld
“You are receiving an OS Upgrade. Unsaved changes will
be lost.
Would you like to continue?“
Yes No
This message is displayed when an OS Upgrade is about to
begin. If you do not select Yes within 30 seconds, the system
automatically responds with No.
Receiving
handheld
“Receiving OS. Do not unplug cable.“
This message, along with a progress bar, is displayed while
the OS Upgrade is being transferred.
Receiving
handheld
“Installing OS.“
This message is displayed when the transfer is complete. It is
shown to keep you informed of the handheld’s status.
Receiving
handheld
“OS has been installed. Handheld will restart.“
OK
This information message displays briefly before the
handheld automatically reboots.
Receiving
handheld
“Install was corrupted. Handheld will reboot. You will
need to retry OS upgrade.“
OK
An error occurred during the transmission and the installation
was corrupted. The handheld will reboot. After the reboot,
reinstall the OS Upgrade.

Texas Instruments TI-Nspire Specifications

General

Type	Display
Form factor	Pocket
Product color	Blue, White
Display resolution	320 x 240 pixels
Display size (HxV) (imperial)	0 \
Compatible operating systems	Windows Vista/XP Mac OS X 10.4/10.5
Battery type	AAA
Number of batteries supported	4

Weight and Dimensions

Dimensions (WxDxH)	100 x 198.3 x 28.7 mm